Getting your roof checked after a storm in Tampa
After a strong storm passes the Tampa Bay area, roofers appear on every street. Some are skilled and honest, and some are not. This guide shows what to check yourself, how to document damage, and how to read a roofing quote.
Please note: This page is general information only. Check the details for your own situation before you rely on it.
Stay safe first
Do not climb onto a wet or damaged roof. Stay away from downed power lines and report them to the utility. If water is coming through a ceiling near light fittings, switch off power to that area at the breaker if you can do so safely. Call 911 in an emergency.
Look from the ground
You can learn a lot without a ladder. Walk around the house, and use binoculars or a phone camera zoom.
- Missing, lifted or creased shingles, or tiles that are cracked or out of place.
- Bare patches where granules have washed off shingles.
- Bent flashing around chimneys, vents and walls.
- Gutters pulled loose or full of granules.
- Debris such as branches lying on the roof.
Inside, check ceilings and the attic, if you can enter it safely, for stains, damp insulation and daylight through the roof deck.
Document everything
- Take dated photos and video of the outside and inside before any clean-up.
- Make a list of damaged items.
- Contact your insurer to start a claim and ask what they need.
- Prevent more damage, for example with a tarp, and keep receipts. Insurers usually expect reasonable steps to limit damage.
- Do not throw away damaged materials until the insurer says you may.
Spot a storm chaser
- Knocks on your door right after the storm, often from out of town.
- Asks you to sign a form “just to inspect” that actually commits you to a contract or hands over rights in your insurance claim.
- Offers to “cover your deductible”. Ask your insurer about this; it may be improper.
- Wants a large payment before materials arrive.
- Has no local address and no license number you can verify.
Florida licenses roofing contractors at the state level. Look up any roofer’s license with the state licensing agency before you sign.
Roofing squares in a quote
Roofers measure in squares. One square is 100 square feet of roof surface.
Example. A roof surface of 2,400 sq ft is 24 squares. Roofers add material for waste from cutting at edges, ridges and valleys. With an example waste allowance of 10%: 24 × 1.10 = 26.4, so the order rounds up to 27 squares.
Roof area is larger than the floor area of the house, because the roof slopes and overhangs. If two quotes list very different numbers of squares for the same roof, ask each roofer to show how they measured.
What the quote should list
- Tear-off of old layers, or overlay, and how many layers come off.
- Replacement of damaged roof deck, priced per sheet.
- Underlayment type, flashing, drip edge and vents.
- Permit and inspection.
- Clean-up, including a magnet sweep for nails.
- Warranty on workmanship and on materials.
FAQ
Should I let a roofer meet the insurance adjuster?
It can help, because the roofer can point out damage. Be present yourself, and keep your own photos and notes.
Can I get a second opinion?
Yes. For a large claim, a second inspection from another licensed roofer is sensible before you sign.