Hurricane shutters in Miami: types, measuring and hiring
Shutters protect windows and doors from wind-borne debris during a storm. The time to choose and install them is well before hurricane season, when installers are less busy and you can compare quotes calmly.
Please note: This page is general information only. Check the details for your own situation before you rely on it.
The main types of protection
| Type | How it works | Trade-offs |
|---|---|---|
| Storm panels | Metal or polycarbonate panels bolted or slid into tracks before a storm | Lower cost; must be stored and put up by hand |
| Accordion shutters | Fixed beside the window, unfolded and locked across it | Quick to close; visible on the house all year |
| Roll-down shutters | Stored in a box above the opening, lowered by crank or motor | Easiest to use; higher cost; motorised versions need a manual backup |
| Fabric screens | Strong fabric anchored across the opening | Light to store; check how they mount on your walls |
| Impact-rated windows | The glass and frame themselves resist debris | No set-up before a storm; usually the largest project |
South Florida has some of the strictest building requirements for storm protection in the country. Whatever you choose, ask the installer to show that the product is approved for use in your county and that the installation will be permitted and inspected.
Measure your openings
Quotes are often priced per opening or per square foot. If you measure first, you can check the numbers. Measure width and height of each window and door, and multiply to get the area.
Example. A house has eight windows of 3 ft by 5 ft and one sliding door of 8 ft by 7 ft.
- Windows: 8 × (3 × 5) = 120 sq ft
- Sliding door: 8 × 7 = 56 sq ft
- Total: 176 sq ft
If an example quote for the whole house is $8,800, that works out to 8,800 ÷ 176 = $50 per square foot. Do the same division for each quote, using the same total area.
Installers measure more precisely, including the overlap needed to mount the shutter, so their area may be slightly larger. Ask them to list the size they used for each opening.
Questions for installers
- Which product approval covers this shutter, and can I see it?
- Will you pull the permit and arrange the inspection?
- How are the shutters anchored to my wall type: concrete block, wood frame or stucco over frame?
- Who can close the shutters, and how long does it take one adult?
- What is the warranty on the product and on the installation?
- For roll-down shutters, how do they work during a power cut?
Plan for the person who closes them
Panels are cheap, but somebody has to carry and fit every one, often on a ladder, often in the heat, with a storm on the way. If you travel, or if lifting is hard for you, a type that closes from inside or at ground level may be worth the extra cost. Label panels with their window before you store them.
Common mistakes
- Waiting until a storm is forecast. Installers and supplies are booked up.
- Relying on tape across windows. Tape does not stop debris.
- Forgetting the garage door, which is often the largest opening on the house.
- Losing the hardware for storm panels between seasons.
FAQ
Do shutters lower my insurance cost?
Some insurers give credits for approved opening protection, often after a wind mitigation inspection. Ask your insurer what documents they accept.
Can a renter install shutters?
Only with the landlord’s written permission, because the work changes the building. Ask the landlord what protection the building already has.