Judging insulation and heat loss in a Minneapolis home
In a place with long, very cold winters, two homes of the same size can cost very different amounts to heat. Most of the difference comes from insulation and air leaks. A simple formula shows why, and a short checklist helps you spot weak points on a viewing.
Please note: This page is general education, not financial, tax or investment advice. Check your own numbers and talk to a qualified professional before you decide.
R-value in one sentence
R-value measures how well a material resists heat flowing through it: the higher the number, the slower heat escapes. R-values add up when layers stack, so a wall’s total R includes the insulation, the sheathing, the drywall and the air films.
The conduction heat loss formula
This formula covers heat moving through a surface. It leaves out air leaks, which can be just as large in an old house.
Worked examples. Indoors is 68°F and outdoors is −10°F, so the temperature difference is 78°F. The R-values are example figures.
| Surface | Area | R-value | Heat loss |
|---|---|---|---|
| Wall, little insulation | 100 sq ft | 4 | 100 × 78 ÷ 4 = 1,950 BTU/h |
| Wall, insulated cavity | 100 sq ft | 13 | 600 BTU/h |
| Wall, thicker insulation | 100 sq ft | 21 | 371.4 BTU/h |
| Attic floor, thin layer | 1,000 sq ft | 11 | 7,090.9 BTU/h |
| Attic floor, deep layer | 1,000 sq ft | 49 | 1,591.8 BTU/h |
| Window | 15 sq ft | 2 | 585 BTU/h |
Rounded to one decimal place. Two lessons stand out. The attic is a large surface, so improving it gives a big cut. A window loses heat several times faster per square foot than an insulated wall.
What to look for on a viewing
- Attic. Look through the hatch. Can you see the tops of the ceiling joists? If so, the insulation is thin.
- Ice dams and icicles. Heavy icicles along the eaves in winter can mean warm air leaking into the attic and melting snow on the roof.
- Windows. Single-pane glass, frost on the inside, or rotted frames point to heat loss and condensation trouble.
- Drafts. Hold the back of your hand near outlets on outside walls, door edges and the attic hatch.
- Basement rim joist. The band of wood on top of the foundation wall is often bare and leaky.
- Heating system. Ask its age and when it was last serviced. Check for a working carbon monoxide alarm.
Ask for the numbers
Ask the seller or landlord for twelve months of gas and electric bills, or permission to get the usage history from the utility. Winter months tell you most. Compare usage, not dollars, because rates change. Utilities and state energy offices often explain home energy audits, in which a technician uses a blower door to measure air leakage.
Renters in older buildings
If heat is included in the rent, insulation affects your comfort more than your bill. If you pay for heat, the same checks matter. Ask how the unit is heated, whether you control the thermostat, and whether storm windows go up for winter.
Common mistakes
- Judging a home by a viewing on a mild day.
- Sealing a home tightly without checking ventilation and combustion safety.
- Spending on new windows before the attic, which is often the cheaper fix.
Questions
Is a higher R-value always worth it?
Each extra unit of R saves less than the one before, because heat loss falls with 1 ÷ R. The first layers matter most.
Can I convert BTU per hour to watts?
Yes. One watt is about 3.412 BTU per hour, so 600 BTU/h is about 176 W.