SpunkArt
Color, art and images

How merch mockups work and how to prepare print files

A mockup is a picture of your design on a product, such as a shirt, mug or tote bag, made before anything is printed. It sells the idea. The print file is what actually gets printed, and it has stricter rules.

Two files, two jobs

Mockup imagePrint file
PurposeShow how the product will lookTell the printer exactly what to print
ResolutionScreen size, such as 1600 px wideFull print size, often at 300 pixels per inch
FormatJPEG or WebP for the webUsually PNG with transparency, PDF, or what the printer asks for
AccuracyAn approximationMust be exact

Confusing the two causes most problems: a design exported at screen size and sent to print comes out blurry.

How a mockup is built

Most mockup templates are layered image files with a few parts:

  1. A photo of the blank product, lit and shot straight on or at a slight angle.
  2. A design layer where you drop your artwork, often a “smart object” you can replace.
  3. A warp that bends the flat design to follow the product: around a mug’s curve, or across a shirt’s folds.
  4. A displacement map, a greyscale copy of the product photo that pushes the design’s pixels slightly along the wrinkles, so it looks printed on rather than floating.
  5. A shading layer set to a blend mode such as multiply, which lays the product’s shadows over the design.

Because of the warp and shading, a mockup never shows the colors exactly. Treat it as an illustration, and say so if you use it to sell a product that is printed on demand.

Pixels from inches

Printers usually state the print area in inches or centimetres and ask for a resolution, commonly 300 pixels per inch (often written as DPI). The maths is one multiplication:

pixels = inches × pixels per inch
inches = centimetres ÷ 2.54

Example: a 12 × 16 inch print area at 300 PPI.

  • Width: 12 × 300 = 3600 pixels
  • Height: 16 × 300 = 4800 pixels
  • Total: 17,280,000 pixels

If your artwork is only 1200 pixels wide, it covers 1200 ÷ 300 = 4 inches at full quality. Stretching it to 12 inches works out to 100 pixels per inch, which usually looks soft.

Always use the exact print-area size the printer gives for that product. Sizes differ between products and between printers.

Bleed and safe areas

For anything trimmed or wrapped, such as stickers, cards, posters and full-wrap mugs, printers ask for bleed: extra artwork beyond the cut line, so a slightly off cut does not leave a white edge. They also define a safe area inside the cut line, where text and important detail must stay. Check the template for each product; the amounts vary.

Color: RGB, CMYK and fabric

  • Screens mix light in RGB. Most paper printing uses CMYK inks, which cannot reach some bright RGB colors, especially vivid greens, blues and oranges. Expect those to print duller.
  • Many garment printers accept RGB files and convert them themselves. Follow the printer’s instructions rather than converting on your own.
  • Ink on a dark shirt needs a white underbase, and the fabric’s texture shows through. Fine lines and subtle gradients can break up.
  • Order a sample before you sell a design. It is the only reliable color check.

Preparing the print file: checklist

  1. Canvas at the printer’s exact print-area size in pixels.
  2. Transparent background unless you want a filled rectangle printed.
  3. No semi-transparent edges or soft shadows on garments unless the printer supports them; they can print as speckled halos.
  4. Text converted to outlines or rasterised at full size.
  5. Lines at least as thick as the printer’s stated minimum.
  6. Saved in the format the printer asks for, with a clear file name.

Common mistakes

  • Upscaling a small image. Adding pixels does not add detail. Start from the largest original you have, or redraw it as vector art.
  • Using someone else’s artwork, logos or characters. Print only designs you made or have permission to use.
  • Trusting the mockup’s colors. Check a real sample.

Questions people ask

Can I use a photo of a painting for merch?

Yes, if it is your painting or you have rights to it. Photograph it evenly lit, square to the camera, at the highest resolution you can, and correct the colors against the original before you prepare the print file.

Do I need 300 PPI for everything?

Not always. Large items viewed from a distance can use less. Use what the printer recommends for that product.